Lenses Box is a docker image which contains Lenses and a full installation of Kafka with all its relevant components. The image packs Landoop’s Stream Reactor Connector collection as well. It is all pre-setup and the only requirement is having Docker installed. It contains Lenses, Kafka Broker, Schema Registry, Kafka Connect, 25+ Kafka Connectors with SQL support and various CLI tools.
Before you get started you will need to install Docker. Lenses Development Environment is a docker image that contains not only Lenses but all the relevant services that are pre-setup for your local development.
This container will work even on a low memory 8GB RAM machine. It takes about 30-45 seconds for the services to become available and a couple of minutes for Kafka Connect to load all available connectors.
Don’t have Docker? Check installation instructions here.
Step 1: Get Lenses Development Environment¶
To run Lenses Development Environment you will need to get your personalized token. Get it now via registering at:Lenses Development Environment
Step 2: Single command, Up and Running with Examples¶
docker run --rm -p 3030:3030 --name=lenses-dev --net=host -e EULA="https://dl.lenses.stream/d/?id=CHECK_YOUR_EMAIL_FOR_KEY" landoop/kafka-lenses-dev
Please note that the value of the
--name parameter can be anything you want.
Just remember to replace
lenses-dev with your own value in the
commands found in this page.
You can periodically check for new versions of Lenses:
docker pull landoop/kafka-lenses-dev
Kafka Connect requires a few more minutes to start up since it iterates and loads all the available connectors.
Access Lenses UI¶
In order to access the Lenses web user interface, open your browser and navigate to http://localhost:3030.
admin and enjoy streaming!
Access Command Line¶
In order to access the various Kafka command-line tools, such as the console producer and the console consumer, from a terminal in the Docker container, you should execute the following command:
$ docker exec -it lenses-dev bash root@fast-data-dev / $ kafka-topics --zookeeper localhost:2181 --list
Alternatively, you can directly execute a Kafka command such as
kafka-topics as follows:
docker exec -it lenses-dev kafka-topics --zookeeper localhost:2181 --list
If you enter the container, you will discover that we even provide bash auto-completion for some of the tools!
Access Kafka Broker¶
Making full use of the development environment means you should be able to access the Kafka instance inside the Docker container. The way Docker and Kafka brokers work requires a few extra settings. A Kafka Broker advertises the endpoint accepting client connections and this endpoint must be accessible to your client. When running on macOS or Windows, Docker runs inside a virtual machine which means there will be an extra networking layer in place.
If you run Docker on macOS or Windows, you may need to find the address of the
VM running Docker and export it as the advertised address for the broker (On
macOS it usually is
192.168.99.100). At the same time, you should give the
kafka-lenses-dev image access to the VM’s network:
docker run -e EULA="CHECK_YOUR_EMAIL_FOR_KEY" \ -e ADV_HOST="192.168.99.100" \ --net=host --name=lenses-dev \ landoop/kafka-lenses-dev
If you run on Linux you don’t have to set the
ADV_HOST but you can do
something cool with it. If you set it to be your machine’s IP address you will
be able to access Kafka from any clients in your network. If you decide to run
kafka-lenses-dev in the cloud, you (and all your team) will be able to access
Kafka from your development machines. Just remember to provide the public IP of
If you want your data to persist on the Development environment between multiple
executions, provide a name for your docker instance and do not set the container
to be removed automatically (
--rm flag). For example:
docker run -p 3030:3030 -e EULA="CHECK_YOUR_EMAIL_FOR_KEY" \ --name=lenses-dev landoop/kafka-lenses-dev
Once you want to free up resources, just press
Control-C. Now you have two options: either remove the Development Environment:
docker rm lenses-dev
Or use it at a later time and continue from where you left off:
docker start -a lenses-dev
If you are using docker-machine or setting this up in a Cloud or
DOCKER_HOST is a custom IP address such as
192.168.99.100, you will
need to use the parameters
--net=host -e ADV_HOST=192.168.99.100.
docker run --rm -p 3030:3030 --net=host -e ADV_HOST=192.168.99.100 -e EULA="https://dl.lenses.stream/d/?id=CHECK_YOUR_EMAIL_FOR_KEY" landoop/kafka-lenses-dev
Lenses provides a SQL engine for Apache Kafka handling both batch and stream queries. You can find more details about it here.
View Example Topics¶
The Docker container has been setup to create and produce data to a handful of Kafka topics.
The producers (data generators) are enabled by default. In order to disable the examples from being executed
set the environment variable
-e SAMPLEDATA=0 in the
docker run command.
Run SQL Processors¶
In order to see the SQL processors in action, the following Lenses SQL commands can be executed against the example topics:
SET autocreate = true; INSERT INTO position_reports_Accurate SELECT * FROM `sea_vessel_position_reports` WHERE Accuracy IS true
SET autocreate = true; INSERT INTO position_reports_latitude_filter SELECT Speed, Heading, Latitude, Longitude, Radio FROM `sea_vessel_position_reports` WHERE Latitude > 58
SET autocreate = true; INSERT INTO position_reports_MMSI_large SELECT * FROM `sea_vessel_position_reports` WHERE MMSI > 100000
Of course, there is support for JSON messages as well:
SET autocreate = true; INSERT INTO backblaze_smart_result SELECT (smart_1_normalized + smart_3_normalized) AS sum1_3_normalized, serial_number FROM `backblaze_smart` WHERE _key.serial_number LIKE 'Z%'
If you use custom serde, you can add your jar files under
Topology If you now visit the Topology page in Lenses UI you will be able to view your first data pipelines:
Lenses SQL processors translate to Kafka Streams application. Lenses SQL covers the entire Kafka Streams API functionality.
Setting consumer, producer and streaming properties,
JOINING and aggregating can be seen in this example:
SET `autocreate`=true; SET `auto.offset.reset`='earliest'; SET `commit.interval.ms`='120000'; SET `compression.type`='snappy'; INSERT INTO `cc_payments_fraud` WITH tableCards AS ( SELECT * FROM `cc_data` ) SELECT STREAM p.currency, sum(p.amount) as total, count(*) usage FROM `cc_payments` AS p LEFT JOIN tableCards AS c ON p._key = c._key WHERE c.blocked is true GROUP BY tumble(1,m), p.currency
View the topology¶
The processor detail view displays the stream topology!, so you can see how your Kafka Streams application works. By clicking on any node of the topology, you can review the node configuration or view topic data. You can find a bit more in-depth information on the above query here
The docker image ships with almost 25 Kafka Connectors. You will have one Kafka Connect Worker with all the connectors pre-setup in the classpath so they are ready to be used. Follow the instructions for each connector in order to set their configuration and launch them via the Lenses UI or via the Rest endpoints.
1. How can I run the Development Environment offline?
To run the docker offline, save the download access token to a file when downloading from https://landoop.com/downloads/lenses and run this command:
LFILE=`cat license.json` docker run --rm -it -p 3030:3030 -e LICENSE="$LFILE" landoop/kafka-lenses-dev:latest
2. How much memory does Lenses require?
Lenses has been built with “mechanical sympathy” in mind. Lenses can operate with 4GB RAM memory limit while handling a cluster setup containing 30 Kafka Brokers, more than 10K AVRO Schemas, more than 1000 topics and tens of Kafka Connect connector instances.
The Development Environment is running multiple services in a container: Kafka, ZooKeeper, Schema Registry, Kafka Connect, synthetic data generators and of course Lenses. That means that the recommendation is 5GB of RAM, although it can operate with even less than 4GB (your mileage might vary).
To reduce the memory footprint, it is possible to disable some connectors and shrink the Kafka Connect heap size by applying these
options (choose connectors to keep) to the
docker run command:
-e DISABLE=azure-documentdb,blockchain,bloomberg,cassandra,coap,druid,elastic,elastic5,ftp,hazelcast,hbase,influxdb,jms,kudu,mongodb,mqtt,redis,rethink,voltdb,yahoo,hdfs,jdbc,elasticsearch,s3,twitter -e CONNECT_HEAP=512m
3. How can I connect Lenses to my existing Apache Kafka cluster?
To run Lenses linked to your existing Apache Kafka cluster, you will need to contact us in order to receive the
Enterprise Edition which adds
Kubernetes support, extra monitoring, extra Lenses SQL processor execution modes and more.
4. Why does my Developer Environment have topics?
To make your experience better, we have pre-configured a set of synthetic data generators to get streaming data out of the box.
By default the docker image will launch the data generators;
however you can have them off by setting the environment variable
-e SAMPLEDATA=0 in the
docker run command.
5. Is the Development Environment free?
Developer licenses are free. You can get one or more licenses from our website. The license will expire in six months from the moment you have obtained it. Renewing your license is free! You just have to re-register. You may start your Lenses instance with a different license file and your setup will not be affected.
There are three ways to provide the license file.
- The first one, which we already saw, uses
-e EULA="[EULA]" * If you instead choose to save the license file locally you can provide the file path:
-v /path/to/license.json:/license.conf * You can provide the license as an environment variable:
-e LICENSE="$(cat /path/to/license.json)"